GR-31 is a water soluble ink degradent. It is highly effective on laquer ink, laquer stencil, enamel, vinyl, mylar, poster, UV, plastisol and epoxy ink.
I When used for screen reclamation, begin by carding off excees ink from screen.
II Spray GR-31 onto the mesh and then scrub both sides with a non-abrasive pad or scrub brush until the ink is liquefied.
III High pressure water rinse all ink residue from the screen. By washing from the bottom to top, you will prevent the possibility of any ink locking itself back onto the mesh when it comes in contact with the rinse water. *Check with your local sanitation district regarding limitations on inks that are to be rinsed into drain.